Inconel 625 Pipe Fittings
Inconel 625 Buttweld Fittings, Inconel 625 90 degree Elbow, Inconel Alloy 625 Elbow, Nickel Alloy 625 Pipe Fittings at Best Price in India.
VM Energy Solutions INC is a recognised stockist and seller of Inconel Alloy 625 Pipe Fittings, which has wonderful forming and welding characteristics. With the addition of chromium and different factors inclusive of molybdenum, nickel and nitrogen, Inconel UNS N06625 Lap Joint Stub Ends Pipe Fittings takes on improved corrosion resistance and different properties. When the steel can be submerged, it's far usually distinct because the minimal for resistance to seawater. Containing chromium and nickel, they've one-of-a-kind compositions and properties, however many not unusual characteristics. They are the maximum regularly used varieties of steels that have a tendency to have an excessive chromium content material in comparison to different steel alloys, giving them a better resistance to corrosion.
- Inconel 625 Pipe Fittings Standard Specification
- Inconel 625 Buttweld Fittings International Standard
- Inconel 625 Pipe Fittings Equivalent Grade
- Different Forms of Inconel Alloy 625 Pipe Fittings
- Inconel 625 Pipe Fittings Chemical Composition
- Inconel Alloy 625 Pipe Fittings Mechanical Properties
- Inconel 625 Buttweld Fittings Thickness Chart
- Inconel 625 Pipe Fittings Tolerance Chart
- Largest Inventory Of Inconel 625 Pipe Fittings
In a marine environment, Inconel WNR 2.4856 Long Stubend Pipe Fittings need to be made clean as to whether or not the stainless steel is submerged in seawater or is in reality close to sufficient to the beach such that it may be attacked with the aid of using the chloride found in seawater with the aid of using splashing or carried with the aid of using onshore breeze. It has capabilities like High temperature resistant grades, Improved resistance to pitting corrosion in chloride environments, Stabilised grades for heavy phase welding and excessive temperature applications, and High resistance to well-known corrosion, pitting and pressure corrosion cracking.
Inconel 625 Pipe Elbow, ANSI B16.9 Nickel Alloy 625 Stub End, UNS N06625 Pipe Cap, Alloy 625 Pipe Tee, Inconel® Alloy 625 Reducer, ASTM B366 Inconel Alloy 625 Pipe Fittings, DIN 2.4856 45 Degree Elbow Supplier in Mumbai, India.
Nickel Alloy 625 Short Stubend Pipe Fittings is an excessive temperature austenitic steel with advanced overall performance to standard grades, and so it may face up to lots greater time and abuse earlier than displaying symptoms and symptoms of wear. Not simplest is there the risk of revealing all of your essential electric additives internal this steel, it could cost you loads to update while it shorts out. The chromium on this alloy lets in the formation of a rough, invisible, corrosion resisting chromium oxide film on the steel surface. It may be hardened with the aid of using cold working, however now no longer with the aid of using heat remedy. It gives excessive strength for roll formed structural additives.
We Keep Bulk Stock Of UNS N06625 Pipe Bend, Inconel 625 Pipe Fittings at Our Stockyard, Check Inconel Alloy 625 Welded Fittings Dimension, Buy Alloy 625 Seamless Pipe Fittings at an Affordable Price In India.
Inconel 625 Pipe Fittings Standard Specification
| Specifications | ASTM B366 / ASME SB366 |
|---|---|
| Dimensions | ASME/ANSI B16.9, ASME B16.28, MSS-SP-43, BS4504, BS4504, BS1560, BS10 ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799 |
| Size | Seamless Fittings: 1/2" - 10" Welded Fittings: 1/2" - 48" |
| Thickness | SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS available with NACE MR 01-75 |
| Manufacturing Standards | ASME/ANSI B16.9, ASME B16.28, MSS-SP-43 DIN : DIN2605, DIN2615, DIN2616, DIN2617, DIN28011, DN15-DN1200 BS : BS4504, BS4504, BS1560, BS10 JIS : JIS B2311, JIS B2312, JIS B2313, JIS B2316 GOST : GOST 17375, GOST 17376, GOST 30753, GOST 17378, GOST 17379, GOST 17380 EN: EN10253-1, EN10253-2 |
| Types | Seamless / ERW / Welded / Fabricated |
| Connection | Welding |
| Bending Radius | R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom |
| Elbow | Angle : 22.5 deg, 30deg, 45 deg, 90 deg, 180 deg, 1.0D, 1.5D, 2.0D, 2.5D, 3D, 4D, 5D, 6D, 7D-40D. Standard: ASME B16.9, ASME B16.28, ASME B16.25, MSS SP-75 DIN2605 JISB2311 JISB2312 JISB2313, BS, GB, ISO |
| Manufacturing process | Push, Press, Forge, Cast, etc. |
| Specialized manufacturer of | 90º Elbows, Couplings, Reducers, Inserts, Caps, Nipples, 45º Elbows, Tees, Crosses, Equal Tees & Reducing Tees |
| Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
| Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 | |
Inconel 625 Buttweld Fittings International Standard
| Standard Code | Standard Name |
|---|---|
| American Steel Pipe Fittings Standard | |
| ANSI ASME SA-403 | Forged Durimet pipe fittings |
| ANSI ASME B16.9 | Factory-Made wrought steel pipe fittings |
| ANSI ASME B16.28 | Wrought steel butt-welding short radius elbows and returns |
| ISO 5251 | Stainless steel butt-welding fittings |
| MSS SP-43 | Wrought stainless steel butt-welding fittings |
| MSS SP-75 | Forging butt-welding fittings |
| German Steel Pipe Fittings Standard | |
| DIN 2605 | Steel butt-welding pipe fittings.elbows and bends |
| DIN 2615 | Steel butt-welding pipe fittings.tees |
| DIN 2616 | Steel butt-welding pipe fittings.reducers |
| DIN 2617 | Steel butt-welding pipe fittings.caps |
| Japanese Steel Pipe Fittings Standard | |
| JIS B2311 | Universal steel butt-welding pipe fittings |
| JIS B2312 | Steel butt-welding pipe fittings |
| JIS B2313 | Steel plate butt-welding pipe fittings |
| Other Steel Pipe Fittings Standard | |
| EN 1025 | 3 Butt-welding pipe fittings |
Inconel 625 Pipe Fittings Equivalent Grade
| STANDARD | UNS | WERKSTOFF NR. | AFNOR | EN | JIS | BS | GOST | OR |
| Inconel 625 | N06625 | 2.4856 | NC22DNB4M | NiCr22Mo9Nb | NCF 625 | NA 21 | ХН75МБТЮ | ЭИ602 |
Different Forms of Inconel 625 Pipe Fittings
Inconel 625 Elbow
Inconel 625 Stub End
Inconel 625 Cross
Inconel 625 Pipe Cap
Inconel 625 Tee
Inconel 625 Pipe Bend
Inconel 625 Pipe Nipple
Inconel 625 Concentric Reducer
Inconel 625 Eccentric Reducer
Inconel 625 Pipe Fittings Chemical Composition
| Grade | C | Mn | Si | S | Al | Fe | Ti | Cr2 | Mo | Nb + Ta | Ni |
| 625 | 0.10 | 0.50 | 0.50 | 0.015 | 0.40 | 5.0 | 0.40 | 20.0-23.0 | 8.0-10.0 | 3.15–4.15 | 58.0 min |
Inconel Alloy 625 Pipe Fittings Mechanical Properties
| Grade | Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
| 625 | 8.4 g/cm3 | 1350 °C (2460 °F) | Psi - 75,000 , MPa - 517 | Psi - 1,35,000 , MPa -930 | 42.5 % |
Bulk Stock of Inconel® Alloy 625 Pipe Fittings, Rate of ASTM B366 Inconel 625 Pipe Cap in India, Check online Alloy 625 Elbow Pressure Ratings, Largest DIN 2.4856 Reducer Stockist in India, We offer Inconel 625 Stub End in almost all Sizes.
Inconel 625 Buttweld Fittings Thickness Chart
| Product range and theoretical weights (kg) | |||||||||
| DN | Schedule 10S | Schedule 40S | Schedule 80S | ||||||
| 90° Elbow | 45° Elbow | Equal tee | 90° Elbow | 45° Elbow | Equal tee | 90° Elbow | 45° Elbow | Equal tee | |
| 8 | 0.02 | 0.01 | 0.03 | 0.03 | 0.02 | 0.06 | 0.04 | 0.03 | 0.07 |
| 10 | 0.03 | 0.02 | 0.05 | 0.03 | 0.02 | 0.03 | 0.06 | 0.04 | 0.09 |
| 15 | 0.06 | 0.03 | 0.09 | 0.08 | 0.04 | 0.10 | 0.10 | 0.05 | 0.14 |
| 20 | 0.07 | 0.03 | 0.13 | 0.08 | 0.04 | 0.17 | 0.11 | 0.05 | 0.20 |
| 25 | 0.14 | 0.08 | 0.28 | 0.15 | 0.11 | 0.29 | 0.22 | 0.14 | 0.38 |
| 32 | 0.23 | 0.11 | 0.49 | 0.26 | 0.17 | 0.59 | 0.40 | 0.23 | 0.68 |
| 40 | 0.30 | 0.17 | 0.68 | 0.40 | 0.23 | 0.86 | 0.51 | 0.29 | 1.02 |
| 50 | 0.50 | 0.25 | 0.85 | 0.70 | 0.4 | 1.28 | 0.91 | 0.59 | 1.59 |
| 65 | 0.85 | 0.48 | 1.41 | 1.40 | 0.77 | 2.19 | 1.81 | 0.99 | 3.13 |
| 80 | 1.25 | 0.63 | 1.77 | 2.20 | 1.08 | 3.31 | 2.97 | 1.50 | 4.45 |
| 90 | 1.70 | 0.75 | 2.67 | 2.83 | 1.42 | 4.08 | 4.00 | 2.00 | 5.44 |
| 100 | 2.10 | 1.08 | 3.46 | 4.47 | 2.09 | 5.27 | 6.18 | 2.81 | 7.71 |
| 150 | 5.45 | 2.72 | 8.07 | 10.89 | 5.44 | 10.99 | 16.32 | 8.16 | 13.61 |
| 200 | 10.20 | 5.33 | 15.65 | 21.54 | 10.77 | 20.91 | 33.11 | 16.56 | 28.12 |
| 250 | 18.15 | 9.75 | 26.46 | 38.56 | 19.27 | 35.38 | 51.71 | 25.86 | 49.90 |
| 300 | 25.80 | 13.62 | 39.46 | 59.42 | 29.71 | 62.14 | 79.38 | 39.69 | 83.91 |
| Product range and theoretical weights (kg) | |||||||||
| DN | Schedule 10S | Schedule 40S | Schedule 80S | ||||||
| Con reducer | Ecc reducer | Reducing tee | Con reducer | Ecc reducer | Reducing tee | Con reducer | Ecc reducer | Reducing tee | |
| 40x.25 | 0.19 | 0.19 | 0.60 | 0.26 | 0.26 | 0.76 | 0.34 | 0.34 | 0.90 |
| 50x25 | 0.28 | 0.28 | 0.73 | 0.40 | 0.40 | 1.10 | 0.54 | 0.54 | 1.37 |
| 50x40 | 0.31 | 0.31 | 0.76 | 0.45 | 0.45 | 1.15 | 0.59 | 0.59 | 1.43 |
| 80x.50 | 0.55 | 0.55 | 1.56 | 1.00 | 1.00 | 2.91 | 1.79 | 1.79 | 3.91 |
| 100x50 | 0.78 | 0.78 | 2.94 | 1.50 | 1.50 | 4.48 | 1.95 | 1.95 | 6.55 |
| 100x80 | 0.87 | 0.87 | 3.04 | 1.74 | 1.74 | 4.64 | 2.33 | 2.33 | 6.79 |
| 150x80 | 1.82 | 1.82 | 6.86 | 3.95 | 3.95 | 9.68 | 5.51 | 5.51 | 11.57 |
| 150x100 | 1.96 | 1.96 | 7.10 | 4.07 | 4.07 | 11.94 | 5.96 | 5.96 | 11.97 |
| 200x100 | 3.01 | 3.01 | 13.46 | 6.55 | 6.55 | 17.98 | 9.23 | 9.23 | 24.18 |
| 200x150 | 3.19 | 3.19 | 14.08 | 6.74 | 6.74 | 18.82 | 10.12 | 10.12 | 25.31 |
Inconel 625 Pipe Fittings Tolerance Chart
| Nominal Diameter | O.D.For Bevel End | I.D.For End | Wall Thickness | Elbow | Tee | Reducer | Cap | 180°Elbow | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| DN | NPS | A | B | C | M | H | E | O | K | Roughness | |||
| 15-65 | 1/2-2 1/2 | +1.6/-0.8 | 0.8 | -12.50% | 1.6 | 1.6 | 1.6 | 1.6 | 1.6 | 3.2 | 6.4 | 6.4 | 0.8 |
| 80-100 | 3-4 | 1.6 | 1.6 | 6.4 | |||||||||
| 125-200 | 5-8 | +2.4/-1.6 | |||||||||||
| 250-450 | 10-18 | +4/-3.2 | 3.2 | 2.4 | 2.4 | 2.4 | 2.4 | 2.4 | 9.6 | ||||
| 500-600 | 20-24 | +6.4/-4.8 | 4.8 | 3.2 | 3.2 | 3.2 | 3.2 | 4.8 | 9.6 | ||||
| 650-750 | 26-30 | ||||||||||||
| 4.8 | 4.8 | 4.8 | 4.8 | ||||||||||
| 800-1200 | 32-48 | ||||||||||||
| 1250-1500 | 50-60 | +9.6/-6.4 | 6.4 | 9.6 | 9.6 | 9.6 | 9.6 | 9.6 | |||||
| 1550-1750 | 62-70 | +12.7/-9.6 | 9.6 | 12.7 | 12.7 | ||||||||
| 1800-2000 | 72-80 | +16/-12 | 12 | 16 | 16 | ||||||||
Largest Inventory Of Inconel 625 Pipe Fittings
- Inconel 625 SR Elbow
- ASME B16.5 Nickel Alloy 625 Buttweld Fittings
- Inconel® Alloy 625 180° LR Return Bends
- Inconel Alloy 625 Welded Fittings
- DIN 2.4856 Butt weld Elbow
- UNS N06625 Lap Joint Stub End
- ASTM B366 Inconel Alloy 625 Reducing Nipple
- Inconel 625 Pipe Fittings
- UNS N06625 90° Short Radius Elbow
- Inconel 625 Reducing Cross
- Alloy 625 Elbow
- DIN 2.4856 Two Halve Butt weld Fittings
- Incoloy 625 Reducer
- Inconel® Alloy 625 Pipe Bend
- Inconel 625 45 Deg Elbow
- Nickel Alloy 625 Equal Cross
- UNS N06625 End Cap
- DIN 2.4856 Pipe Nipple
- Inconel Alloy 625 Pipe Elbow
- Inconel Alloy 625 Butt weld Nipple
- WERKSTOFF NR. 2.4856 Barrel Nipple
- Inconel 625 Industrial Pipe Fittings
- ASME SB366 Nickel Alloy 625 Long Radius Bend
- Alloy 625 1D Elbow/3D Elbow/5D Elbow
- Inconel Alloy 625 Stub End
- UNS N06625 Lateral Tee
- ASME SB366 Nickel Alloy 625 Eccentric Reducer
- Inconel 625 BS 4504 Piggable Bend
- DIN 2.4856 LR Elbows
- 625 Inconel Butt weld Fittings
- ANSI B16.5 Inconel 625 Mandrel Bend
- Inconel® Alloy 625 90° Short Radius Elbow
- UNS N06625 Long Stub End
- ANSI B16.5 Inconel 625 Pipe Fittings
- DIN 2.4856 Long Stub End
- ASTM B366 Inconel 625 Buttweld Fittings
- Inconel Alloy 625 Two Joint Pipe Fittings
- UNS N06625 Butt weld Tee
ASTM B366 Inconel Alloy 625 Pipe Fittings Application
