Super Duplex Steel UNS S32750 / S32760 Fittings
Super Duplex Grade S32760 Threaded Fittings, Super Duplex Steel UNS S32760 Threaded Union, Super Duplex Steel UNS S32750 Threaded Elbow, SDSS S32750 Threaded Coupling at Best Price in India.
VM Energy Solutions INC is a well-known manufacturer and exporter of Super Duplex S32750 / S32760 Threaded Fittings, which has wonderful properties right all the way down to cryogenic temperatures. Super Duplex 2507 Threaded Tee Fittings has notable excessive temperature strength, oxidation proof against 1800 Degree F, galling resistant, proof against marine environments, acids and frame fluids. This product has given suitable provider in lots of jet engine parts. Some of these consist of turbine blades, combustion chambers, afterburner parts, and turbine rings. This product has additionally been used efficaciously in a whole lot of business furnace applications consisting of furnace muffles and liners in essential spots in excessive temperature kilns. It has suitable forming traits and is able to being forged, hot working or cold working.
Table of Contents
- Super Duplex Steel UNS S32750 / S32760 Threaded Fittings Standard Specification
- Super Duplex Steel UNS S32750 / S32760 Threaded Fittings Standard
- Super Duplex Steel UNS S32750 / S32760 Threaded Fittings International Standards
- Different Forms of Super Duplex Steel UNS S32750 / S32760 Threaded Fittings
- Super Duplex Steel UNS S32750 / S32760 Threaded Fittings Chemical Composition
- Super Duplex Steel UNS S32750 / S32760 Threaded Fittings Mechanical Properties
- Size Chart Of Super Duplex Steel UNS S32750 / S32760 Flange
- Weight Chart Of Super Duplex Steel UNS S32750 / S32760 Threaded Fittings
- Largest Inventory Of Super Duplex Steel UNS S32750 / S32760 Threaded Fittings
- Manufacturing Standard / Pressure Rating of Super Duplex Steel UNS S32750 / S32760 Pipe Threaded Fittings
Alloy 2507 Threaded Lateral Tee Fittings does paintings-harden very unexpectedly so common intermediate annealing remedies are propose for complicated forming operations. This product does working-harden very unexpectedly, however, so common intermediate annealing remedies will be needed for complicated issue forming operations. However, it is higher to cold-paintings this product for bending, spinning and drawing the components. Wrought this product is provided within the solution heat handled condition, until in any other case specified. The weld metallic deposited with the aid of using this steel has houses much like the ones of comparable alloy.
Super Duplex 2507 Threaded Fittings, DIN 1.4462 Threaded Full Coupling, ANSI B16.5 SDSS S32750 Threaded End Pipe Cap, Super Duplex Steel UNS S32760 High Pressure Threaded Fittings, UNS S32760 Threaded Plug, ASTM A182 Super Duplex Steel UNS S32750 Pipe Nipple, Super Duplex Grade S32750 Threaded 45 deg Supplier in Mumbai, India.
Super Duplex WNR 1.4410 Threaded Bend Fittings is a nickel-chromium precipitation-hardening alloy perfect for excessive strength at temperatures above 1300 Degree F, with useful strength as much as 1800 Degree F. The strength of this steel is fairly much less than that for alloy as much as approximately 1400 Degree F (760 Degree C), and remarkable than that for alloy at better temperatures. It is available in all standard mill forms and consequently it is used for a huge style of applications. In gas generators it's miles used for rotor blades, wheels, bolts; and so this steel is likewise used for rocket-engine thrust chambers. Airframe applications for this steel consist of thrust reversers and hot-air ducting systems.
We Keep Bulk Stock Of UNS S32760 WNRF Threaded Fittings, Super Duplex Steel UNS S32750 Threaded Plug at Our Stockyard, Check Super Duplex Grade S32760 High Pressure Threaded Fittings Dimension, Buy Super Duplex Steel UNS S32750 Threaded Full Coupling at an Affordable Price In India.
Super Duplex Steel UNS S32750 / S32760 Threaded Fittings Standard Specification
| Specifications | ASTM A182 / ASME SA182 |
|---|---|
| Size | 1/8" NB to 4" NB in |
| Threaded Fittings Dimensions | ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799 |
| Pressure Rating | 4000lb/ 3000lb/ 6000lbs |
| Thread | NPT, BSPT, BSPP |
| Manufacturing Standards | ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799 DIN : DIN2605, DIN2615, DIN2616, DIN2617, DIN28011 BS : BS3799 EN: EN10253-1, EN10253-2 |
| Connection | Welding |
| Manufacturing process | Push, Press, Forge, Cast, etc. |
| Specialized manufacturer of | 90º Elbows, 45º Elbows, Tees, Crosses, Couplings, Inserts, Caps, Nipples, and Unions, Forged Pipe Fittings, Socket Weld & Threaded, Equal Tees & Reducing Tees, 90° & 45° Elbows – Female-Female, Male-Female, Male-Male, Union, Nipples, Couplings, Plugs Fittings |
| Forged Fittings Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
| Threaded Fittings uses & application | Fittings To Connect Pipe & Tubes in Petroleum, Power, Chemical, Construction, Gas, Metallurgy, Shipbuilding etc |
| Material Test Certificates (MTC) for Duplex Steel UNS S32750 / S32760 Threaded Fittings as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 | |
Super Duplex Steel UNS S32750 / S32760 Threaded Fittings Standard
| American Steel Threaded Fittings Standard | |
| Standard Code | Standard Name |
| ANSI ASME SA-182 | Forged Flanges |
| ANSI ASME B16.5 | Slip on flange, Welding neck flange, Blind flange, Threaded flange, Lap joint flange, RTJ flange |
| ASME – B 16.47 | Welding neck flange, Blind flange |
| ASME – B 16.36 | Welding neck flange Slip on flange |
| German Steel Flanges Standard | |
| DIN 2527 | Steel Blind Flanges, BLRF |
| DIN 2573 / 2576 | Flat Flange for Welding (Slip On) |
| DIN 2673 | Loose Flanges and Rings for Welding (Slip On Flanges and Plain Collars) |
| DIN 2641 / 2642 | Lapped / Loose (Lap Joint) Flanges Plain Collars |
| DIN 28115 | Long Neck Welding Flanges |
| DIN PN10, PN16 | PN10 Flanges, DIN PN 10 Flanges, PN16 Flange |
| DIN PN20, PN25 | PN20 Flanges, DIN PN 25 Flanges |
| DIN PN40, PN50 | PN40 Flanges, DIN PN 50 Flanges |
| Japanese Steel Flanges Standard | |
| JIS B2220 | Slip On plate flange (SOP), Slipon Hub (SOH), Socket Welding flange (SW), Welding neck flange (WN), Lap Joint (LJ), Threaded flange (TR)/ Integral flange (IT) Blank flange (BL) |
| JIS B2291 | Slip On plate flange (SOP), Slipon Hub (SOH), Socket Welding flange (SW), Welding neck flange (WN), Lap Joint (LJ), Threaded flange (TR)/ Integral flange (IT) Blank flange (BL) |
| JIS 5K, 10K | 5K SORF Flanges, 10K SOFF Flanges |
| JIS 16K, 20K | 16K Blind Flanges, 20K BLRF Flanges |
| JIS 30K, 40K | 30K Slip on Flanges, 40K Blind Flanges |
| Italian Flanges Standard | |
| UNI FLANGES | Plan flanges (2276, 2277, 2278, 6083, 6084) Welding neck (2280, 2281, 2282, 2283, 2284, 2285, 2286) Lapped flanges (6088, 6089, 6090, 2999, 2300) Blind flanges (6091, 6092, 6093, 6094, 6095, 6096, 6097) threaded flanges (2253, 2254) |
| British Standard Pipe Flanges Standard | |
| BS 10 Table D | BS 10 Table D Flanges, Table D Pipe Flange |
| BS 10 Table E | BS 10 Table E Flanges, Table E Pipe Flange |
| BS 10 Table F | BS 10 Table E Flanges, Table E Flanges |
| BS 10 Table H | BS 10 Table E Flanges, Table E Pipe Flanges |
Super Duplex Steel UNS S32750 / S32760 Threaded Fittings International Standards
| STANDARD | WERKSTOFF NR. | UNS |
| Super Duplex Steel S32750/S32760 | 1.4462 | S32750/S32760 |
Different Forms of Super Duplex Steel UNS S32750 / S32760 Threaded Fittings
Super Duplex Steel UNS S32750 / S32760 Threaded Elbow
Super Duplex Steel UNS S32750 / S32760 Threaded Coupling
Super Duplex Steel UNS S32750 / S32760 Threaded Union
Super Duplex Steel UNS S32750 / S32760 Threaded Tee
Super Duplex Steel UNS S32750 / S32760 Threaded Cross
Super Duplex Steel UNS S32750 / S32760 Threaded Pipe Cap
Super Duplex Steel UNS S32750 / S32760 Threaded Bushing
Super Duplex Steel UNS S32750 / S32760 Threaded Plug
Super Duplex Steel UNS S32750 / S32760 Screwed Pipe Nipple
Super Duplex Steel UNS S32750 / S32760 Threaded Fittings Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
| Super Duplex Steel S32750 | 0.030 max | 2.0 max | 1.0 max | 0.030 max | 0.020 max | 22.0 – 23.0 | 3.0 – 3.5 | 4.50 – 6.50 | 0.14 – 0.20 |
| Super Duplex Steel S32760 | 0.030 max | 2.0 max | 1.0 max | 0.030 max | 0.020 max | 21.0 – 23.0 | 2.50 – 3.50 | 4.50 – 6.50 | 0.8 – 0.20 |
Super Duplex Steel UNS S32750 / S32760 Threaded Fittings Mechanical Properties
| Density (g/cm 3) | Density (lb/in 3) | Melting Point (°C) | Melting Point (°F) |
| 7.805 | 0.285 | 1420 – 1465 | 2588 – 2669 |
Bulk Stock of Super Duplex Steel UNS S32750 Threaded Fittings, Rate of ASTM A182 Super Duplex Steel UNS S32760 Threaded Elbow in India, Check online Super Duplex Grade S32750 Threaded Coupling Pressure Ratings, Largest DIN 1.4462 Threaded Union Stockist in India, We offer Super Duplex 2507 Forged Threaded Tee in almost all Sizes.
Size Chart Of Super Duplex Steel UNS S32750 / S32760 Threaded Fittings
| Normal Pipe Size | Threaded Fittings Diameter ('O') |
Diameter of (B.C.) 'A' |
Diameter of (B.H.) 'D' |
Holes Number |
Threaded Fittings Wall Thickness 'C' |
Diameter (Threaded Fittings) at Weld Bevel | (Threaded Fittings) Diameter of Hub 'E' |
Length Of Through Hub | Bore ('B') | Diameter of (RF) R |
Depth of Socket Weld F |
Threading Length |
||||
| SORF/ SWRF (Y) |
WNRF (Y) |
Lap Joit (Y) |
SORF/ SWRF (B) |
Lap Joit (B) |
||||||||||||
| 1/2'' | 15 | 95.2 | 66.7 | 15.9 | 4 | 14.3 | 21.3 | 38.1 | 22.2 | 52.4 | 22.2 | 22.3 | 22.9 | 34.9 | 9.5 | 15.9 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3/4'' | 20 | 117.5 | 82.5 | 19.0 | 4 | 15.9 | 26.7 | 47.6 | 25.4 | 57.1 | 25.4 | 27.7 | 28.2 | 42.9 | 11.1 | 15.9 |
| 1'' | 25 | 123.8 | 88.9 | 19.0 | 4 | 17.5 | 33.5 | 54.0 | 27.0 | 61.9 | 27.0 | 34.5 | 35.0 | 50.8 | 12.7 | 17.5 |
| 1 | 32 | 133.3 | 98.4 | 19.0 | 4 | 20.6 | 42.2 | 63.5 | 28.6 | 66.7 | 28.6 | 43.2 | 43.7 | 63.5 | 14.3 | 20.6 |
| 1 | 40 | 155.6 | 114.3 | 22.2 | 4 | 22.2 | 48.3 | 69.8 | 31.7 | 69.8 | 31.7 | 49.5 | 50.0 | 73.0 | 15.9 | 22.2 |
| 2'' | 50 | 165.1 | 127.0 | 19.0 | 8 | 25.4 | 60.4 | 84.1 | 36.5 | 73.0 | 36.5 | 62.0 | 62.5 | 92.1 | 17.5 | 25.4 |
| 2 | 65 | 190.5 | 149.2 | 22.2 | 8 | 28.6 | 73.1 | 100.0 | 41.3 | 79.4 | 41.3 | 74.7 | 75.4 | 104.8 | 19.0 | 28.6 |
| 3'' | 80 | 209.5 | 168.3 | 22.2 | 8 | 31.8 | 88.9 | 117.5 | 46.0 | 82.5 | 46.0 | 90.7 | 91.4 | 127.0 | - | 30.2 |
| 3 | 90 | 228.5 | 184.2 | 22.2 | 8 | 34.9 | 101.6 | 133.4 | 49.3 | 85.7 | 49.3 | 103.4 | 104.1 | 140.0 | - | 31.7 |
| 4'' | 100 | 273.0 | 215.9 | 25.4 | 8 | 38.1 | 114.3 | 152.4 | 54.0 | 101.6 | 54.0 | 116.1 | 116.8 | 157.2 | - | 33.3 |
| 5'' | 125 | 330.2 | 266.7 | 28.6 | 8 | 44.4 | 141.2 | 188.9 | 60.3 | 114.3 | 60.3 | 143.8 | 144.5 | 185.7 | - | 36.5 |
| 6'' | 150 | 355.6 | 292.1 | 28.6 | 12 | 47.6 | 168.4 | 222.2 | 66.7 | 117.5 | 66.7 | 170.7 | 171.4 | 215.9 | - | 39.7 |
| 8'' | 400 | 419.1 | 349.2 | 31.7 | 12 | 55.6 | 219.2 | 273.0 | 76.2 | 133.3 | 76.2 | 221.5 | 222.2 | 269.9 | - | 44.4 |
| 10'' | 250 | 508.0 | 431.8 | 34.9 | 16 | 63.5 | 273.0 | 342.9 | 85.7 | 152.4 | 111.2 | 276.3 | 277.4 | 323.8 | - | 49.2 |
| 12'' | 300 | 558.8 | 488.9 | 34.9 | 20 | 66.7 | 323.8 | 400.0 | 92.1 | 155.6 | 117.3 | 327.1 | 328.2 | 381.0 | - | 55.6 |
| 14'' | 350 | 603.2 | 527.0 | 38.1 | 20 | 69.9 | 355.6 | 431.8 | 93.7 | 165.1 | 127.0 | 359.1 | 360.2 | 412.7 | - | 57.1 |
| 16'' | 400 | 685.8 | 603.2 | 41.3 | 20 | 76.2 | 406.4 | 495.3 | 106.4 | 177.8 | 139.7 | 410.5 | 411.2 | 469.9 | - | 63.5 |
| 18'' | 450 | 742.9 | 654.0 | 44.4 | 24 | 82.6 | 457.2 | 546.1 | 117.5 | 184.1 | 152.4 | 461.8 | 462.3 | 533.4 | - | 68.3 |
| 20'' | 500 | 812.8 | 723.9 | 44.4 | 24 | 88.9 | 508.0 | 609.6 | 127.0 | 190.5 | 165.1 | 513.1 | 514.3 | 584.2 | - | 73.0 |
| 24'' | 600 | 939.8 | 838.2 | 50.8 | 24 | 101.6 | 609.6 | 717.5 | 139.7 | 203.2 | 184.1 | 615.9 | 615.9 | 692.1 | - | 82.5 |
Weight Chart Of Copper Nickel 90/10 Threaded Fittings
| Pressure Class | Nominal Size Of Pipe (NPS) In Inch | Slip On (SORF) In Inch | Threaded (NPT) In Inch | Socket Weld (SWRF) In Inch | Lap Joint (LOOSE) In Inch | Blind (BLRF) In Inch | Weld Neck (WNRF) In Inch |
|---|---|---|---|---|---|---|---|
| Class 150 Threaded Fittings | ½ | 1 | 1 | 2 | 1 | 2 | 2 |
| ¾ | 2 | 2 | 2 | 2 | 2 | 2 | |
| 1 | 2 | 2 | 2 | 2 | 2 | 3 | |
| 1¼ | 3 | 3 | 3 | 3 | 3 | 3 | |
| 1½ | 3 | 3 | 3 | 3 | 4 | 4 | |
| 2 | 5 | 5 | 5 | 5 | 5 | 6 | |
| 2½ | 8 | 8 | 8 | 8 | 7 | 10 | |
| 3 | 9 | 9 | 9 | 9 | 9 | 11.5 | |
| 3½ | 11 | 12 | 11 | 11 | 13 | 12 | |
| 4 | 13 | 13 | 13 | 13 | 17 | 16.5 | |
| 5 | 15 | 15 | 15 | 15 | 20 | 21 | |
| 6 | 19 | 19 | 19 | 19 | 27 | 26 | |
| 8 | 30 | 30 | 30 | 30 | 47 | 42 | |
| 10 | 43 | 43 | 43 | 43 | 70 | 54 | |
| 12 | 64 | 64 | 64 | 64 | 123 | 88 | |
| 14 | 90 | 90 | 90 | 105 | 140 | 114 | |
| 16 | 106 | 98 | 98 | 140 | 180 | 140 | |
| 18 | 130 | 130 | 130 | 160 | 220 | 165 | |
| 20 | 165 | 165 | 165 | 195 | 285 | 197 | |
| 22 | 185 | 185 | 185 | 245 | 355 | 225 | |
| 24 | 220 | 220 | 220 | 275 | 430 | 268 | |
| Pressure Class | Nominal Size Of Pipe (NPS) | Slip On (SORF) | Threaded (NPT) | Socket Weld (SWRF) | Lap Joint (LOOSE) | Blind (BLRF) | Weld Neck (WNRF) |
| Class 300 Threaded Fittings | ½ | 2 | 2 | 3 | 2 | 2 | 2 |
| ¾ | 3 | 3 | 3 | 3 | 3 | 3 | |
| 1 | 3 | 3 | 3 | 3 | 4 | 4 | |
| 1¼ | 4.5 | 4.5 | 4 | 4.5 | 6 | 5 | |
| 1½ | 6.5 | 6.5 | 6 | 6.5 | 7 | 7 | |
| 2 | 7 | 7 | 7 | 7 | 8 | 9 | |
| 2½ | 10 | 10 | 10 | 10 | 12 | 12 | |
| 3 | 13 | 14 | 13 | 14.5 | 16 | 18 | |
| 3½ | 17 | 17 | 17 | 17 | 21 | 20 | |
| 4 | 23.5 | 24 | 22 | 24 | 28 | 26.5 | |
| 5 | 29 | 31 | 28 | 28 | 37 | 36 | |
| 6 | 39 | 39 | 39 | 39 | 50 | 45 | |
| 8 | 58 | 58 | 58 | 58 | 81 | 69 | |
| 10 | 81 | 81 | 81 | 91 | 124 | 100 | |
| 12 | 115 | 115 | 115 | 140 | 185 | 142 | |
| 14 | 165 | 165 | 165 | 190 | 250 | 206 | |
| 16 | 210 | 220 | 190 | 234 | 315 | 250 | |
| 18 | 253 | 280 | 250 | 305 | 414 | 320 | |
| 20 | 315 | 325 | 315 | 375 | 515 | 400 | |
| 22 | 370 | 370 | 370 | 435 | 640 | 465 | |
| 24 | 490 | 490 | 475 | 550 | 800 | 580 | |
| Pressure Class | Nominal Size Of Pipe (NPS) | Slip On (SORF) | Threaded (NPT) | Socket Weld (SWRF) | Lap Joint (LOOSE) | Blind (BLRF) | Weld Neck (WNRF) |
| Class 400 Threaded Fittings | ½ | 2 | 2 | 2 | 2 | 2 | 3 |
| ¾ | 3 | 3 | 3 | 3 | 3 | 3.5 | |
| 1 | 3.5 | 3.5 | 3.5 | 3.5 | 4 | 4 | |
| 1¼ | 4.5 | 4.5 | 4.5 | 4.5 | 6 | 4.5 | |
| 1½ | 6.5 | 6.5 | 6.5 | 6.5 | 8 | 8 | |
| 2 | 8 | 8 | 8 | 8 | 10 | 10 | |
| 2½ | 12 | 12 | 12 | 11 | 15 | 14 | |
| 3 | 15 | 15 | 15 | 14 | 20 | 18 | |
| 3½ | 21 | 21 | 21 | 20 | 29 | 26 | |
| 4 | 26 | 26 | 26 | 25 | 33 | 35 | |
| 5 | 31 | 31 | 31 | 29 | 44 | 43 | |
| 6 | 44 | 44 | 44 | 42 | 61 | 57 | |
| 8 | 67 | 67 | 67 | 64 | 100 | 89 | |
| 10 | 91 | 91 | 91 | 110 | 155 | 125 | |
| 12 | 130 | 130 | 130 | 152 | 226 | 175 | |
| 14 | 191 | 191 | 191 | 210 | 310 | 233 | |
| 16 | 253 | 253 | 253 | 280 | 398 | 295 | |
| 18 nbsp; | 310 | 310 | 310 | 345 | 502 | 360 | |
| 20 | 378 | 378 | 378 | 420 | 621 | 445 | |
| 22 | 405 | 405 | 405 | 455 | 720 | 505 | |
| 24 | 539 | 539 | 539 | 615 | 936 | 640 | |
| Pressure Class | Nominal Size Of Pipe (NPS) | Slip On (SORF) | Threaded (NPT) | Socket Weld (SWRF) | Lap Joint (LOOSE) | Blind (BLRF) | Weld Neck (WNRF) |
| Class 800 Threaded Fittings | ½ | 2 | 2 | 2 | 2 | 3 | 3 |
| ¾ | 3 | 3 | 3 | 3 | 4 | 4 | |
| 1 | 4 | 4 | 4 | 4 | 4 | 4 | |
| 1¼ | 5 | 5 | 5 | 5 | 6 | 6 | |
| 1½ | 7 | 7 | 7 | 7 | 8 | 8 | |
| 2 | 9 | 9 | 9 | 9 | 10 | 12 | |
| 2½ | 13 | 13 | 13 | 12 | 15 | 18 | |
| 3 | 16 | 16 | 16 | 15 | 20 | 23 | |
| 3½ | 21 | 21 | 21 | 20 | 29 | 26 | |
| 4 | 37 | 37 | 37 | 36 | 41 | 42 | |
| 5 | 63 | 63 | 63 | 63 | 68 | 68 | |
| 6 | 80 | 80 | 80 | 78 | 86 | 81 | |
| 8 | 115 | 15 | 15 | 112 | 140 | 120 | |
| 10 | 177 | 177 | 177 | 195 | 231 | 190 | |
| 12 | 215 | 215 | 215 | 240 | 295 | 226 | |
| 14 | 259 | 259 | 259 | 290 | 378 | 347 | |
| 16 | 366 | 366 | 366 | 400 | 527 | 481 | |
| 18 | 476 | 476 | 476 | 469 | 665 | 555 | |
| 20 | 612 | 612 | 612 | 604 | 855 | 690 | |
| 22 | 590 | 590 | 590 | 670 | 1000 | 720 | |
| 24 | 876 | 876 | 876 | 866 | 1250 | 977 | |
| Pressure Class | Nominal Size Of Pipe (NPS) | Slip On (SORF) | Threaded (NPT) | Socket Weld (SWRF) | Lap Joint (LOOSE) | Blind (BLRF) | Weld Neck (WNRF) |
| Class 900 Threaded Fittings | ½ | 6 | 6 | 6 | 6 | 4 | 7 |
| ¾ | 6 | 6 | 6 | 6 | 6 | 7 | |
| 1 | 7.5 | 7.5 | 7.5 | 7.5 | 9 | 8.5 | |
| 1¼ | 10 | 10 | 10 | 10 | 10 | 10 | |
| 1½ | 14 | 14 | 14 | 14 | 14 | 14 | |
| 2 | 22 | 22 | 22 | 21 | 25 | 24 | |
| 2½ | 31 | 31 | 31 | 25 | 32 | 31 | |
| 3 | 36 | 36 | 36 | 29 | 35 | 36 | |
| 4 | 53 | 53 | 53 | 51 | 54 | 53 | |
| 5 | 83 | 83 | 83 | 81 | 87 | 86 | |
| 6 | 110 | 110 | 110 | 105 | 115 | 110 | |
| 8 | 172 | 172 | 172 | 190 | 200 | 187 | |
| 10 | 245 | 245 | 245 | 277 | 290 | 268 | |
| 12 | 326 | 326 | 326 | 371 | 415 | 372 | |
| 14 | 400 | 400 | 400 | 415 | 520 | 562 | |
| 16 | 459 | 459 | 459 | 488 | 619 | 685 | |
| 18 | 647 | 647 | 647 | 670 | 880 | 924 | |
| 20 | 792 | 792 | 792 | 868 | 1107 | 1164 | |
| 24 | 1480 | 1480 | 1480 | 1659 | 2099 | 2107 | |
| Pressure Class | Nominal Size Of Pipe (NPS) | Slip On (SORF) | Threaded (NPT) | Socket Weld (SWRF) | Lap Joint (LOOSE) | Blind (BLRF) | Weld Neck (WNRF) |
| Class 1500 Threaded Fittings | ½ | 6 | 6 | 6 | 6 | 4 | 7 |
| ¾ | 6 | 6 | 6 | 6 | 6 | 7 | |
| 1 | 8 | 8 | 8 | 8 | 9 | 9 | |
| 1¼ | 10 | 10 | 10 | 10 | 10 | 10 | |
| 1½ | 14 | 14 | 14 | 14 | 14 | 14 | |
| 2 | 25 | 25 | 25 | 25 | 25 | 25 | |
| 2½ | 36 | 36 | 36 | 35 | 35 | 36 | |
| 3 | 48 | 48 | 48 | 47 | 48 | 48 | |
| 4 | 73 | 73 | 73 | 75 | 73 | 73 | |
| 5 | 132 | 132 | 132 | 140 | 140 | 132 | |
| 6 | 165 | 165 | 165 | 170 | 160 | 165 | |
| 8 | 260 | 260 | 260 | 286 | 302 | 275 | |
| 10 | 436 | 436 | 436 | 485 | 510 | 455 | |
| 12 | 667 | 667 | 667 | 749 | 775 | 690 | |
| 14 | 940 | 940 | 940 | 890 | 975 | 940 | |
| 16 | 1250 | 1250 | 1250 | 1250 | 1300 | 1250 | |
| 18 | 1625 | 1625 | 1625 | 1475 | 1750 | 1625 | |
| 20 | 2050 | 2050 | 2050 | 1775 | 2225 | 2050 | |
| 24 | 2825 | 2825 | 2825 | 2825 | 3625 | 3325 | |
| Pressure Class | Nominal Size Of Pipe (NPS) | Slip On (SORF) | Threaded (NPT) | Socket Weld (SWRF) | Lap Joint (LOOSE) | Blind (BLRF) | Weld Neck (WNRF) |
| Class 2500 Threaded Fittings | ½ | …. | 7 | …. | 7 | 7 | 8 |
| ¾ | …. | 9 | …. | 8 | 10 | 9 | |
| 1 | …. | 12 | …. | 12 | 12 | 13 | |
| 1¼ | …. | 18 | …. | 17 | 18 | 20 | |
| 1½ | …. | 25 | …. | 24 | 25 | 28 | |
| 2 | …. | 38 | …. | 37 | 39 | 42 | |
| 2½ | …. | 55 | …. | 53 | 56 | 52 | |
| 3 | …. | 83 | …. | 80 | 86 | 94 | |
| 4 | …. | 127 | …. | 122 | 133 | 146 | |
| 5 | …. | 210 | …. | 204 | 223 | 244 | |
| 6 | …. | 323 | …. | 314 | 345 | 378 | |
| 8 | …. | 485 | …. | 471 | 533 | 576 | |
| 10 | …. | 925 | …. | 897 | 1025 | 1068 | |
| 12 | …. | 1300 | …. | 1262 | 1464 | 1608 |
Largest Inventory Of Super Duplex Steel UNS S32750 / S32760 Threaded Fittings
- DIN 1.4462 Threaded Coupling
- ASME B16.5 SDSS S32760 Threaded Pipe Nipple
- Super Duplex Stainless Steel S32750 BLRF Threaded Fittings
- Super Duplex Steel UNS S32750 PN 10 Flange
- DSS S32750 Forged Threaded Tee
- Super Duplex Stainless Steel S32760 Threaded Fittings
- SDSS UNS S32760 150# Threaded Fittings
- Super Duplex Grade S32750 Threaded Elbow
- SDSS S32760 Bushing
- DIN 1.4462 Threaded Union
- Super Duplex Steel UNS S32760 Threaded 45 deg
- Super Duplex Grade S32760 Threaded Plug
- SDSS S32750 Threaded Fittings
- Super Duplex 2507 High Pressure Threaded Fittings
- Super Duplex Steel UNS S32760 Threaded Full Coupling
- ASTM A182 DSS S32750 Theraded 90 degree Elbow
- Super Duplex Steel UNS S32750 RTJ Forged Threaded Elbow
- Super Duplex Steel UNS S32750 Threaded Fittings
- UNS C70600 Threaded End Pipe Cap
- DIN 1.4462 150# Threaded Fittings
- DIN 1.4462 Bushing
- SAF 2507 4504 Threaded Fittings
- Super Duplex Steel UNS S32760 Threaded Fittings
- DSS S32750 Forged Threaded Elbow
- ASME SA182 Super Duplex Stainless Steel S32750 Theraded 90 degree Elbow
- Super Duplex Steel UNS S32760 Forged Threaded Tee
- ANSI B16.5 Super Duplex Stainless Steel S32750 Threaded Elbow
- Super Duplex Grade S32760 Threaded Fittings
- ASTM A182 Super Duplex 2507 Threaded Fittings
- DIN 1.4462 Threaded Coupling
- ANSI B16.5 Super Duplex Stainless Steel S32760 Threaded Union
- Super Duplex Steel UNS S32750 Threaded Full Coupling
- Super Duplex Grade S32750 Threaded Fittings
- DSS S32760 High Pressure Threaded Fittings
- WERKSTOFF NR. 1.4462 Threaded 45 deg
- Super Duplex Steel UNS S32750 Threaded End Pipe Cap
- ASME SA182 Super Duplex Steel UNS S32750 Threaded Cross
- DIN 1.4462 DN150 PN16 Threaded Plug
Manufacturing Standard / Pressure Rating of Super Duplex Steel UNS S32750 / S32760 Pipe Threaded Fittings
| ASME/ANSI B 16.5 | Blind Flange, High Hub Blind Flange, Slip on Flange, Welding Neck Flange, Socket Weld Flange, Ring Type Joint Flange, Lap Joint Flange, Threaded Flange |
| PRESSURE CLASS | 150, 300, 400, 600, 900, 1500, 2500 |
| ASME/ANSI B 16.47 | Blind Flange [Series A & B],Welding Neck Flange |
| PRESSURE CLASS | 75, 150, 300, 400, 600, 900 |
| ASME/ANSI B 16.36 | Slip on Flange, Threaded Flange, Welding Neck Flange, |
| PRESSURE CLASS | 300, 400, 600, 900, 1500, 2500 |
| BS 4504 SEC 3.1 | Plate Flange, Loose Plate Flange, Loose Plate With Weld Neck Flange, Blank Flange, Welding Neck Flange, Hubbed Slip on Flange, Hubbed Threaded Flange, Lapped Pipe End Flange, |
| PRESSURE CLASS | PN 2.5 TO PN 40 |
| BS 4504[PART 1] | Plate Flange, Loose Plate With Weld On Plate Collar, Blank Flange, Welding Neck Flange, Hubbed Slip-On Hubbed Threaded, |
| PRESSURE CLASS | PN 2.5 TO PN 400 |
| BS 1560 BOSS | Plate Flange, Loose Plate With Weld On Plate Collar, Blank Flange, Welding Neck Flange, Hubbed Slip-On Hubbed Threaded, |
| PRESSURE CLASS | 150, 300, 400, 600, 900, 1500, 2500 |
| BS10 | Welding Neck Flange, Plate Slip-On Flange, Screwed Boss Flange, Slip-On Boss Flange, Blind Flange |
| TABLE | D, E, F, H |
| DIN Threaded Fittings | DIN 2527, 2566, 2573, 2576, 2641,2642, 2655, 2656, 2627, 2628, 2629, 2631, 2632, 2633, 2634, 2635, 2636, 2637,2638, 2673 |
| PRESSURE CLASS | PN 6 TO PN 100 |
ASTM A182 Super Duplex Steel UNS S32750 / S32760 Threaded Fittings Application
Paper Mills
0%
Chemical Industries
0%
Nuclear Power
0%
Petrochemicals
0%
Gas & Water Pipe Line
0%
