Stainless Steel 347H Pipe Fittings
Stainless Steel 347H 90 degree Elbow, 347H Stainless Steel Buttweld Fittings, SS 347H Elbow, 347H Stainless Steel Pipe Fittings at Best Price in India.
VM Energy Solutions INC is a recognised exporter and stockist of SS 347h Pipe Fittings, which are made as in step with standard fine of raw materials. Stainless Steel UNS S34709 Reducer Pipe Fittings consists of excessive contents of Cr and Ni, possesses many attractive properties, including brilliant oxidation resistance, corrosion resistance, and creep strength. It gives top resistance in applications related to outside publicity to mildly corrosive situations at ambient temperatures. It may be applied in barely oxidizing, nitriding, cementing and thermal cycling applications, albeit, the most provider temperature ought to be reduced. Trusting on our skill-ability and expertise on this arena, we're an eminent agency in providing an in depth variety of this steel, which this allows the alloy to absolutely slip past the pipe.
- Stainless Steel 347H Pipe Fittings Standard Specification
- Stainless Steel 347H Buttweld Fittings International Standard
- Stainless Steel 347H Pipe Fittings Equivalent Grade
- Different Forms of 347H Stainless Steel Pipe Fittings
- Stainless Steel 347H Pipe Fittings Chemical Composition
- 347H Stainless Steel Pipe Fittings Mechanical Properties
- Stainless Steel 347H Buttweld Fittings Thickness Chart
- Stainless Steel 347H Pipe Fittings Tolerance Chart
- Largest Inventory Of Stainless Steel 347H Pipe Fittings
On the opposite hand, this Stainless Steel WNR 1.4961 Concentric Reducer Pipe Fittings right here is counter-bored to well known the pipe, and the width of the left at again of bore is much like its indoor pipe diameter. The primary utilization of such steel is of their superb stress structures, including like steam traces and hydraulic. Meanwhile, we offer these products in extraordinary sizes, grades and thickness as in step with custom-made demands furnished through our clients at a totally affordable price. Well, they're as well diagnosed as this alloy, and are at big synthetic by using an internal diameter of the pipe that is pretty better than the outside diameter of the pipe fairly.
SS 347H Pipe Tee, Stainless Steel 347H Reducer, DIN 1.4961 45 Degree Elbow, ANSI B16.9 SS 347H Stub End, Stainless Steel 347H Pipe Elbow, ASTM A403 SS 347H Pipe Fittings, UNS S34709 Pipe Cap Supplier in Mumbai, India.
Alloy 347H Eccentric Reducer Pipe Fittings are linked, commonly each outdoor and inside, for to offer strength and additionally to forestall the leakage in pipes. They are utilized in numerous industries like oil and gas projects, drainage system, water offering and plenty of others. They are disadvantaged of a doubt restrict its application to fairly decrease down the stress within the piping structures. In short, they're used to attach different threaded sections in non-essential and occasional stress applications. They are extensively utilized in piping structures through approach of getting low stress, as no welding is fretful whilst connecting these flanges to the pipes or different equipment.
We Keep Bulk Stock Of UNS S34709 Pipe Bend, 347H Stainless Steel Pipe Fittings at Our Stockyard, Check SS 347H Welded Fittings Dimension, Buy SS 347H Seamless Pipe Fittings at an Affordable Price In India.
Stainless Steel 347H Pipe Fittings Standard Specification
| Specifications | ASTM A403 / ASME SA403 |
|---|---|
| Dimensions | ASME/ANSI B16.9, ASME B16.28, MSS-SP-43, BS4504, BS4504, BS1560, BS10 ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799 |
| Size | Seamless Fittings: 1/2" - 10" Welded Fittings: 1/2" - 48" |
| Thickness | SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS available with NACE MR 01-75 |
| Manufacturing Standards | ASME/ANSI B16.9, ASME B16.28, MSS-SP-43 DIN : DIN2605, DIN2615, DIN2616, DIN2617, DIN28011, DN15-DN1200 BS : BS4504, BS4504, BS1560, BS10 JIS : JIS B2311, JIS B2312, JIS B2313, JIS B2316 GOST : GOST 17375, GOST 17376, GOST 30753, GOST 17378, GOST 17379, GOST 17380 EN: EN10253-1, EN10253-2 |
| Types | Seamless / ERW / Welded / Fabricated |
| Connection | Welding |
| Bending Radius | R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom |
| Elbow | Angle : 22.5 deg, 30deg, 45 deg, 90 deg, 180 deg, 1.0D, 1.5D, 2.0D, 2.5D, 3D, 4D, 5D, 6D, 7D-40D. Standard: ASME B16.9, ASME B16.28, ASME B16.25, MSS SP-75 DIN2605 JISB2311 JISB2312 JISB2313, BS, GB, ISO |
| Manufacturing process | Push, Press, Forge, Cast, etc. |
| Specialized manufacturer of | 90º Elbows, Couplings, Reducers, Inserts, Caps, Nipples, 45º Elbows, Tees, Crosses, Equal Tees & Reducing Tees |
| Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
| Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 | |
Stainless Steel 347H Buttweld Fittings International Standard
| Standard Code | Standard Name |
|---|---|
| American Steel Pipe Fittings Standard | |
| ANSI ASME SA-403 | Forged Durimet pipe fittings |
| ANSI ASME B16.9 | Factory-Made wrought steel pipe fittings |
| ANSI ASME B16.28 | Wrought steel butt-welding short radius elbows and returns |
| ISO 5251 | Stainless steel butt-welding fittings |
| MSS SP-43 | Wrought stainless steel butt-welding fittings |
| MSS SP-75 | Forging butt-welding fittings |
| German Steel Pipe Fittings Standard | |
| DIN 2605 | Steel butt-welding pipe fittings.elbows and bends |
| DIN 2615 | Steel butt-welding pipe fittings.tees |
| DIN 2616 | Steel butt-welding pipe fittings.reducers |
| DIN 2617 | Steel butt-welding pipe fittings.caps |
| Japanese Steel Pipe Fittings Standard | |
| JIS B2311 | Universal steel butt-welding pipe fittings |
| JIS B2312 | Steel butt-welding pipe fittings |
| JIS B2313 | Steel plate butt-welding pipe fittings |
| Other Steel Pipe Fittings Standard | |
| EN 1025 | 3 Butt-welding pipe fittings |
Stainless Steel 347H Pipe Fittings Equivalent Grade
| STANDARD | WERKSTOFF NR. | UNS | JIS | GOST | EN |
| SS 347HH | 1.4961 | S34709 | SUS 347HH | - | X6CrNiNb18-12 |
Different Forms of 347H Stainless Steel Pipe Fittings
SS 347H Elbow
SS 347H Stub End
SS 347H Cross
SS 347H Pipe Cap
SS 347H Tee
SS 347H Pipe Bend
SS 347H Pipe Nipple
SS 347H Concentric Reducer
SS 347H Eccentric Reducer
Stainless Steel 347H Pipe Fittings Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | Cb | Ni | Fe |
| SS 347HH | 0.04 – 0.10 | 2.0 max | 1.0 max | 0.045 max | 0.030 max | 17.00 - 19.00 | 8xC – 1.10 | 9.0 -13.0 | 63.72 min |
347H Stainless Steel Pipe Fittings Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.0 g/cm3 | 1454 °C (2650 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
Bulk Stock of 347H Stainless Steel Pipe Fittings, Rate of ASTM A403 F347H Pipe Cap in India, Check online 347H Stainless Steel Elbow Pressure Ratings, Largest DIN 1.4961 Reducer Stockist in India, We offer Stainless Steel 347H Stub End in almost all Sizes.
Stainless Steel 347H Buttweld Fittings Thickness Chart
| Product range and theoretical weights (kg) | |||||||||
| DN | Schedule 10S | Schedule 40S | Schedule 80S | ||||||
| 90° Elbow | 45° Elbow | Equal tee | 90° Elbow | 45° Elbow | Equal tee | 90° Elbow | 45° Elbow | Equal tee | |
| 8 | 0.02 | 0.01 | 0.03 | 0.03 | 0.02 | 0.06 | 0.04 | 0.03 | 0.07 |
| 10 | 0.03 | 0.02 | 0.05 | 0.03 | 0.02 | 0.03 | 0.06 | 0.04 | 0.09 |
| 15 | 0.06 | 0.03 | 0.09 | 0.08 | 0.04 | 0.10 | 0.10 | 0.05 | 0.14 |
| 20 | 0.07 | 0.03 | 0.13 | 0.08 | 0.04 | 0.17 | 0.11 | 0.05 | 0.20 |
| 25 | 0.14 | 0.08 | 0.28 | 0.15 | 0.11 | 0.29 | 0.22 | 0.14 | 0.38 |
| 32 | 0.23 | 0.11 | 0.49 | 0.26 | 0.17 | 0.59 | 0.40 | 0.23 | 0.68 |
| 40 | 0.30 | 0.17 | 0.68 | 0.40 | 0.23 | 0.86 | 0.51 | 0.29 | 1.02 |
| 50 | 0.50 | 0.25 | 0.85 | 0.70 | 0.4 | 1.28 | 0.91 | 0.59 | 1.59 |
| 65 | 0.85 | 0.48 | 1.41 | 1.40 | 0.77 | 2.19 | 1.81 | 0.99 | 3.13 |
| 80 | 1.25 | 0.63 | 1.77 | 2.20 | 1.08 | 3.31 | 2.97 | 1.50 | 4.45 |
| 90 | 1.70 | 0.75 | 2.67 | 2.83 | 1.42 | 4.08 | 4.00 | 2.00 | 5.44 |
| 100 | 2.10 | 1.08 | 3.46 | 4.47 | 2.09 | 5.27 | 6.18 | 2.81 | 7.71 |
| 150 | 5.45 | 2.72 | 8.07 | 10.89 | 5.44 | 10.99 | 16.32 | 8.16 | 13.61 |
| 200 | 10.20 | 5.33 | 15.65 | 21.54 | 10.77 | 20.91 | 33.11 | 16.56 | 28.12 |
| 250 | 18.15 | 9.75 | 26.46 | 38.56 | 19.27 | 35.38 | 51.71 | 25.86 | 49.90 |
| 300 | 25.80 | 13.62 | 39.46 | 59.42 | 29.71 | 62.14 | 79.38 | 39.69 | 83.91 |
| Product range and theoretical weights (kg) | |||||||||
| DN | Schedule 10S | Schedule 40S | Schedule 80S | ||||||
| Con reducer | Ecc reducer | Reducing tee | Con reducer | Ecc reducer | Reducing tee | Con reducer | Ecc reducer | Reducing tee | |
| 40x.25 | 0.19 | 0.19 | 0.60 | 0.26 | 0.26 | 0.76 | 0.34 | 0.34 | 0.90 |
| 50x25 | 0.28 | 0.28 | 0.73 | 0.40 | 0.40 | 1.10 | 0.54 | 0.54 | 1.37 |
| 50x40 | 0.31 | 0.31 | 0.76 | 0.45 | 0.45 | 1.15 | 0.59 | 0.59 | 1.43 |
| 80x.50 | 0.55 | 0.55 | 1.56 | 1.00 | 1.00 | 2.91 | 1.79 | 1.79 | 3.91 |
| 100x50 | 0.78 | 0.78 | 2.94 | 1.50 | 1.50 | 4.48 | 1.95 | 1.95 | 6.55 |
| 100x80 | 0.87 | 0.87 | 3.04 | 1.74 | 1.74 | 4.64 | 2.33 | 2.33 | 6.79 |
| 150x80 | 1.82 | 1.82 | 6.86 | 3.95 | 3.95 | 9.68 | 5.51 | 5.51 | 11.57 |
| 150x100 | 1.96 | 1.96 | 7.10 | 4.07 | 4.07 | 11.94 | 5.96 | 5.96 | 11.97 |
| 200x100 | 3.01 | 3.01 | 13.46 | 6.55 | 6.55 | 17.98 | 9.23 | 9.23 | 24.18 |
| 200x150 | 3.19 | 3.19 | 14.08 | 6.74 | 6.74 | 18.82 | 10.12 | 10.12 | 25.31 |
Stainless Steel 347H Pipe Fittings Tolerance Chart
| Nominal Diameter | O.D.For Bevel End | I.D.For End | Wall Thickness | Elbow | Tee | Reducer | Cap | 180°Elbow | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| DN | NPS | A | B | C | M | H | E | O | K | Roughness | |||
| 15-65 | 1/2-2 1/2 | +1.6/-0.8 | 0.8 | -12.50% | 1.6 | 1.6 | 1.6 | 1.6 | 1.6 | 3.2 | 6.4 | 6.4 | 0.8 |
| 80-100 | 3-4 | 1.6 | 1.6 | 6.4 | |||||||||
| 125-200 | 5-8 | +2.4/-1.6 | |||||||||||
| 250-450 | 10-18 | +4/-3.2 | 3.2 | 2.4 | 2.4 | 2.4 | 2.4 | 2.4 | 9.6 | ||||
| 500-600 | 20-24 | +6.4/-4.8 | 4.8 | 3.2 | 3.2 | 3.2 | 3.2 | 4.8 | 9.6 | ||||
| 650-750 | 26-30 | ||||||||||||
| 4.8 | 4.8 | 4.8 | 4.8 | ||||||||||
| 800-1200 | 32-48 | ||||||||||||
| 1250-1500 | 50-60 | +9.6/-6.4 | 6.4 | 9.6 | 9.6 | 9.6 | 9.6 | 9.6 | |||||
| 1550-1750 | 62-70 | +12.7/-9.6 | 9.6 | 12.7 | 12.7 | ||||||||
| 1800-2000 | 72-80 | +16/-12 | 12 | 16 | 16 | ||||||||
Largest Inventory Of Stainless Steel 347H Pipe Fittings
- DIN 1.4961 End Cap
- UNS S34709 90° Short Radius Elbow
- Stainless Steel 347H Pipe Bend
- 347H PN 16 Stainless Steel Pipe Nipple
- Stainless Steel 347H SR Elbow
- 347H Stainless Steel Elbow
- Stainless Steel 347H Two Halve Butt weld Fittings
- SS 347H Pipe Elbow
- DIN 1.4961 Equal Cross
- SS 347H Reducer
- 347H Stainless Steel 180° LR Return Bends
- UNS S34709 Pipe Fittings
- ASME B16.9 SS 347H Buttweld Fittings
- SS 347H Welded Fittings
- Stainless Steel 347H Reducing Cross
- DIN 1.4961 Butt weld Elbow
- UNS S34709 45 Deg Elbow
- ASTM A403 SS 347H Reducing Nipple
- Stainless Steel 347H Lap Joint Stub End
- ANSI B16.9 Stainless Steel 347H Mandrel Bend
- UNS S34709 1D Elbow/3D Elbow/5D Elbow
- ASME SA403 F347H Long Radius Bend
- WERKSTOFF NR. 1.4961 Barrel Nipple
- SS 347H BS 4504 Piggable Bend
- Stainless Steel 347H Industrial Pipe Fittings
- DIN 1.4961 Long Stub End
- ANSI B16.9 Stainless Steel 347H Pipe Fittings
- SS 347H Stub End
- 347H Stainless Steel Lateral Tee
- UNS S34709 Butt weld Nipple
- DIN 1.4961 Butt weld Tee
- ASME SA403 F347H SS Eccentric Reducer
- 347H Stainless Steel 90° Short Radius Elbow
- ASTM A403 F347H Buttweld Fittings
- SS 347H Long Stub End
- 347H Stainless Steel LR Elbows
- DIN 1.4961 Two Joint Pipe Fittings
- UNS S34709 Butt weld Fittings
ASTM A403 SS 347H Pipe Fittings Application
