Stainless Steel 321 Socket Weld Fittings
Stainless Steel 321 Socket Weld Fittings, 321 Stainless Steel Socket Weld Plug, Stainless Steel 321 Socket Weld Pipe Nipple, SS 321 High Pressure Socket Weld Fittings at Best Price in India.
VM Energy Solutions INC is an acknowledged seller and trader of Stainless Steel 321 Socket Weld Fittings, which may be rolled formed, stamped and drawn effectively. Stainless Steel UNS S32100 Socket Weld Cross Fittings is likewise utilized in Aircraft and jet engine elements, Heat exchangers, Auto exhaust elements, Refinery and chemical processing system. It may be utilized in a selection of applications, wherein right here are only a few examples: Aircraft and jet engine elements, Auto exhaust elements, and greater. It is important to maintain the device reducing always and use chip breakers. Preheating isn't important for this steel, wherein inter-pass temperature need to now no longer exceed one hundred and fifty degree Celsius. It has a miles much less carbon composition which minimizes carbide precipitation and improves weldability.
- Stainless Steel 321 Socket Weld Fittings Standard Specification
- Stainless Steel 321 Socket Weld Fittings Standard
- Stainless Steel 321 Socket Weld Fittings International Standards
- Different Forms of 321 Stainless Steel Socket Weld Fittings
- Stainless Steel 321 Socket Weld Fittings Chemical Composition
- 321 Stainless Steel Socket Weld Fittings Mechanical Properties
- Size Chart Of Stainless Steel 321 Socket Weld Fittings
- Weight Chart Of Stainless Steel 321 Socket Weld Fittings
- Largest Inventory Of Stainless Steel 321 Socket Weld Fittings
- Manufacturing Standard / Pressure Rating of 321 SS Socket Weld Fittings
Stainless Steel WNR 1.4541 Socket Weld Cap Fittings are utilized in oven linings, boiler baffles, fire container sheets, furnace additives and different excessive temperature containers. It need to be cast at a temperature of approximately 2150 Degree F (1175 Degree C) and now no longer cast tons beneath 1800 Degree F (980 Degree C). This system is accompanied with the aid of using rapid cooling in this steel to reap most corrosion resistance. It is likewise utilized in kiln liners, boiler baffles, refinery and chemical processing system, and car exhaust elements. It is as well utilized in retorts and oven linings, fans, tube hangers, and baskets and trays to preserve small elements.
ASTM A182 SS 321 Socket Weld Union, ANSI B16.5 SS 321 Socket Weld 90 deg, SS 321 Socket Weld Cross, Stainless Steel 321 Socket Weld 180 deg. Elbow, DIN 1.4541 Socket Weld Pipe Cap, UNS S32100 Socket Weld Half Coupling, Stainless Steel 321 Socket Weld Fittings Supplier in Mumbai, India.
Alloy 321 Socket Weld Coupling Fittings gives great resistance to oxidation, and so it is important to maintain the device reducing always and use chip breakers. To keep away from overheating or burn-thru of thinner sheets in this steel, better welding speeds should be applied. It gives great excessive temperature strength, at the side of their resistance to creep deformation and environmental attack. For most advantageous corrosion resistance, it need to be annealed after forging. In the food processing enterprise, they're used in touch with hot acetic and citric acid. However, it must be completely annealed after cold-operating to lessen inner stress.
Buy SS 321 Socket Weld Full Coupling, 321 Stainless Steel Socket Weld Fittings at Our Stockyard, We Keep Bulk Stock Of UNS S32100 WNRF High Pressure Socket Weld Fittings, Check SS 321 Socket Weld Pipe Nipple Dimension at an Affordable Price In India.
Stainless Steel 321 Socket Weld Fittings Standard Specification
| Specifications | ASTM A182 / ASME SA182 |
|---|---|
| Size | 1/8" NB to 4" NB in |
| Threaded Fittings Dimensions | ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799 |
| Pressure Rating | 2000lb/ 3000lb/ 6000lbs |
| Thread | NPT, BSPT, BSPP |
| Manufacturing Standards | ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799 DIN : DIN2605, DIN2615, DIN2616, DIN2617, DIN28011 BS : BS3799 EN: EN10253-1, EN10253-2 |
| Connection | Welding |
| Manufacturing process | Push, Press, Forge, Cast, etc. |
| Specialized manufacturer of | 90º Elbows, 45º Elbows, Tees, Crosses, Couplings, Inserts, Caps, Nipples, and Unions, Forged Pipe Fittings, Socket Weld & Threaded, Equal Tees & Reducing Tees, 90° & 45° Elbows – Female-Female, Male-Female, Male-Male, Union, Nipples, Couplings, Plugs Fittings |
| Socket Weld Forged Fittings Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
| Socket Weld Fittings uses & application | Fittings To Connect Pipe & Tubes in Petroleum, Power, Chemical, Construction, Gas, Metallurgy, Shipbuilding etc |
| Material Test Certificates (MTC) for Stainless Steel 321 Socket Weld Fittings as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 | |
Stainless Steel 321 Socket Weld Fittings Standard
| ASTM A182 – ASME SA182 Forged Fittings | Standard Specification for Wrought Austenitic SS Piping Fitting |
| ASME B16.9 Forged Fittings | Factory-Made Wrought BW Fittings |
| ASME B16.11 Forged Fittings | Forged Steel Fittings, SW – Welding and NPT |
| MSS SP-43 | Wrought and Fabricated BW Fittings for Hight And Low Pressure |
| BS3799 | Specification for Steel fittings, screwed and SW for the Oil And Gas Industry |
Stainless Steel 321 Socket Weld Fittings International Standards
| STANDARD | WERKSTOFF NR. | UNS | JIS | EN |
| SS 321 | 1.4541 | S32100 | SUS 321 | X6CrNiTi18-10 |
Different Forms of 321 Stainless Steel Socket Weld Fittings
SS 321 Socketweld Union
SS 321 Socketweld Tee
SS 321 Socketweld Plug
SS 321 Socketweld Full Coupling
SS 321 Socketweld Elbow
SS 321 Socketweld Cross
SS 321 Socketweld Coupling
SS 321 Socketweld Cap
SS 321 Socket Weld Tee
Stainless Steel 321 Socket Weld Fittings Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
| SS 321 | 0.08 max | 2 max | 1.0 max | 0.045 max | 0.030 max | 17 – 19 | - | 9 – 12 | - |
321 Stainless Steel Socket Weld Fittings Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.0 g/cm3 | 1457 °C (2650 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
Bulk Stock of 321 Stainless Steel Socket Weld Fittings, Rate of ASTM A182 F321 Socket Weld 180 deg in India, Check online 321 Stainless Steel Socket Weld Plug Pressure Ratings, Largest DIN 1.4541 High Pressure Socket Weld Fittings Stockist in India, We offer Stainless Steel 321 Socket Weld Pipe Nipple in almost all Sizes.
Size Chart Of Stainless Steel 321 Socket Weld Fittings
| Description | Class Designation | ||
|---|---|---|---|
| 3000LB | 6000LB | 9000LB | |
| Elbows 45 deg and 90 deg, Tee, Crosse, Coupling, Half-Coupling, End or Pipe Cap |
½ - 4 | ½ - 2 | ½ - 2 |
| ½ - 4 | ½ - 2 | ½ - 2 | |
| ½ - 4 | ½ - 2 | ½ - 2 | |
Weight Chart Of Stainless Steel 321 Socket Weld Fittings
| Normal Size Of Pipe | Type A | Type B | QTY | Weight Chart |
|---|---|---|---|---|
| ¼ | 0.81 | 0.88 | 160 | 0.20 |
| ⁄ | 0.97 | 1.00 | 130 | 0.26 |
| ½ | 1.12 | 1.31 | 100 | 0.57 |
| ¾ | 1.31 | 1.5 | 75 | 0.71 |
| 1 | 1.5 | 1.81 | 40 | 1.08 |
| 1 ¼ | 1.75 | 2.19 | 25 | 1.68 |
| 1 ½ | 2.00 | 2.44 | 18 | 2.38 |
| 2 | 2.38 | 2.97 | 10 | 3.55 |
| 2 ½ | 3.00 | 3.62 | 4 | 6.22 |
| 3 | 3.38 | 4.31 | 2 | 10.36 |
| 4 | 4.19 | 5.75 | 1 | 23.91 |
Largest Inventory Of Stainless Steel 321 Socket Weld Fittings
- UNS S32100 PN 10 Socket Weld Cross
- ASME B16.5 SS 321 High Pressure Socket weld Fittings
- DIN 1.4541 High Pressure Socket Weld Fittings
- SS 321 Socket Weld End Pipe Cap
- Stainless Steel 321 Socket Weld Equal Tee
- ASTM A182 SS 321 Socket Weld Full Coupling
- 321 PN 16 Stainless Steel Socket Weld Fittings
- UNS S32100 Socket Weld Pipe Elbow
- Tee SCH80 Socket Weld Fittings
- DIN 1.4541 Socket Weld Fittings
- 321 Stainless Steel Socket Weld Fittings
- Stainless Steel 321 Half Coupling
- SS 321 Socket Weld Fittings
- 3000 lbs ansi b16.11 socket Weld female thread coupling
- 321 Stainless Steel Socket Weld Fittings
- UNS S32100 Socket Weld Plug
- DIN 1.4541 Socket Weld Fittings
- Stainless Steel 321 Socket Weld 45 deg. Elbow
- UNS S32100 Forged Socket weld Elbow
- SS 321 180 deg. Socket Weld Elbow
- DIN 1.4541 Socket Weld Forged Elbow
- ASTM A182 F321 WNRF Socket Weld Pipe Nipple
- SS 321 Socket weld Pipe Elbow
- 321 Stainless Steel Socket weld Unequal Tee
- ASME B16.11 2000# 321 Half Coupling
- ASME SA182 F321 Socket Weld Tee
- UNS S32100 Forged Socket Weld Elbow
- DIN 1.4541 150# Union
- ANSI B16.5 Stainless Steel 321 Socket Weld Fittings
- 321 Stainless Steel Socket Weld Fittings
- SS 321 Socket Weld Pipe Nipple
- 9000LB B16.11 SS Socket Weld Fittings
- ASME SA182 F321 SS Socket Weld Fittings
- SS 321 Groove & Tongue Flange
- UNS S32100 Socket weld Plug
- ANSI B16.5 Stainless Steel 321 Socket Weld Fittings
- WERKSTOFF NR. 1.4541 Socket weld Fittings
- SS 321 Socket Weld Fittings
Manufacturing Standard / Pressure Rating of 321 SS Pipe Socket Weld Fittings
| Pressure-Temperature for ASME B16.11 Threaded Fittings (psig) | |||||
|---|---|---|---|---|---|
| Temperature | Class | ||||
| Class 150 | Class 300 | ||||
| 1/4 - 1 inch | 1 1/4 - 2 inch | 2 1/2 - 3 inch | |||
| (oF) | (oC) | ||||
| -20 to 150 | -29 to 66 | 300 | 2000 | 1500 | 1000 |
| 200 | 93 | 265 | 1785 | 1350 | 910 |
| 250 | 121 | 225 | 1575 | 1200 | 825 |
| 300 | 149 | 185 | 1360 | 1050 | 735 |
| 350 | 177 | 150 | 1150 | 900 | 650 |
| 400 | 204 | - | 935 | 750 | 560 |
| 450 | 232 | - | 725 | 600 | 475 |
| 500 | 260 | - | 510 | 450 | 385 |
| 550 | 288 | - | 300 | 300 | 300 |
ASTM A182 SS 321 Socket Weld Fittings Application
